The main configuration screen for the Virus Scanner Configuration can be found under Proxy Management in the System Management section of the WebTool. However, this is unaccessible until you enable the Virus Scanner.
To enable to virus scanner you must first have created at least one virtual host. Refer to the Virtual Host Management, in your EnGarde Secure Professional manual for information on how to do this. Once you have a virtual host setup select General Configuration from the Proxy Management screen. At the bottom of this menu is Virus Scanning Host. Choose the Use This Host option. There will then be a list of the virtual hosts found on the EnGarde machine to choose from. Once the virtual host has been chosen click the Save Configuration button in the lower right corner.
Now that virus scanning has been enabled you will see the option Virus Scanner Configuration is now available and ready to be used. Before Virus Scanning is enabled, this section should be reviewed and changes appropriately made or the Virus Scan may not operate properly or at all.
