Once you have made your selection a warning box will appear informing you that all data on the drive will be lost. EnGarde will install on the first drive found on the specified bus you selected. For example, if you chose IDE then /dev/hda will be used, and if you chose SCSI then /dev/sda will be used.
EnGarde Secure Professional is a server operating system and is designed to be the only system on the machine. For this reason all information on the primary installation disk will be destroyed; other drives in the system will remain untouched.
If you wish to use additional disks in your system, you must change to manual mode for partitioning.
After OK is selected partitioning will proceed.
