Configuring the Remote Security Gateway

Once you have configured the Local Security Gateway and have downloaded a Remote Configuration you may configure the Remote Security Gateway.

1. Enter the IPsec Module

Log onto the WebTool, click the "Security" icon, then the "IPsec Management" link.

2. Define Interfaces and Set Defaults

From the module index click the "General Configuration" link. Check the boxes next to the interfaces you want to use for IPsec and (optionally) set defaults. Click "Save Configuration"

3. Upload Remote Configuration

From the module index click "Upload Remote Configuration". Select the file you saved to your local computer above and click "Upload Profile."

The WebTool will automatically create a Local Security Gateway for this machine corresponding to the information in the file you upload. The verification screen you see will ask you to name this new Security Gateway.

This page will also show you what new certificates/keys will be imported.

Enter a name in the "Gateway Name" box and click "Continue with Upload."

4. Restart IPsec

From the module index click the "Restart IPsec" link toward the bottom of the page.