Creating a Filter

1. After configuring the Tunnel Endpoint the Windows XP Security Policy window will gain focus again. From this menu select the Add button.
2. The New Rule Properties window will be displayed. From this menu select Add again.

   
   
   

   
   
   
   

3. The Name and Description must now be filled in.

   Name

   VPN Connection 2

   Description

   Traffic coming from the Guardian Digital VPN Network to the Windows XP Network.

4. Once the fields have been completed click Add and the Filter Properties menu will appear.

   
   
   

   
   
   
   

5. Fill in the fields with the following information:

   Source Address

   Select A Specific IP Subnet.

   IP Subnet

   Enter address of the network, not the IP address, routed by the Windows XP server.

   Destination Address

   Enter the address of the network routed by the Guardian Digital VPN.

   Mirrored

   Remove the check, if present.

   • [NOTE:]For a subnet-to-ip-address configuration change the Source Address to 'A specific IP Address' and enter in the IP Address of the Windows XP Server.

6. Click the Description tab and enter 'Filter from the Guardian Digital VPN Network to the Windows XP Network.

   
   
   

   
   
   
   

7. Once the information has been filled in click the Description tab and enter in to the Description entry box ``Filter from the Guardian Digital VPN Network to the Windows XP Network''.
8. Once this is entered in click OK and then click OK again.
9. From the IP Filter Lists list, choose the filter that was just created ``Traffic coming from the Guardian Digital VPN Network to the Windows XP Network''.